Bill Martyn
New Member
Posts:2
 |
| 09 Jun 2007 04:10 AM |
|
POSTING FOR PRACTICE |
|
|
|
|
|
|
ritanbria
New Member
Posts:2
|
| 15 Aug 2007 12:43 AM |
|
Yea Jumpin In. I just came to this site, don't know what I am doing. Need a solar answer or two. |
|
|
|
|
ritanbria
New Member
Posts:2
|
| 15 Aug 2007 12:45 AM |
|
Am I in the right place? |
|
|
|
|
ARdolson
New Member
Posts:14
|
| 23 Feb 2008 03:37 PM |
|
no this is a testing area (I'm just testing.) |
|
|
|
|
Father of the Paw
New Member
Posts:8
|
| 27 Feb 2008 11:58 PM |
|
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments? |
|
|
|
|
zey
New Member
Posts:4
|
| 11 Aug 2008 08:19 PM |
|
i am trying to figure out where the real post box is.......
|
|
|
|
|
HolmesEcoDesign
New Member
Posts:11
|
| 24 Dec 2008 01:42 AM |
|
Posted By ARdolson on 02/23/2008 3:37 PM
no this is a testing area (I'm just testing.)
How does this quote thing work? |
|
|
|
|
HolmesEcoDesign
New Member
Posts:11
|
| 24 Dec 2008 01:43 AM |
|
i am trying to figure out
|
|
|
|
|
HolmesEcoDesign
New Member
Posts:11
|
| 24 Dec 2008 01:44 AM |
|
Posted By zey on 08/11/2008 8:19 PM
i am trying to figure out where da box is.......
What da monkey? |
|
|
|
|
HolmesEcoDesign
New Member
Posts:11
|
| 24 Dec 2008 01:45 AM |
|
Surviving section is standard 8' stud walls encased in a classic limestone block exterior,
I think I've figured it out
|
|
|
|
|
HolmesEcoDesign
New Member
Posts:11
|
| 24 Dec 2008 01:46 AM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Surviving section is standard 8' stud walls encased in a classic limestone block exterior,
I think I got it. |
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 09 Mar 2009 09:42 AM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 09 Mar 2009 09:43 AM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments? HEEEEEEEEE
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 09 Mar 2009 09:44 AM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 09 Mar 2009 09:57 PM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 09 Mar 2009 09:59 PM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 10 Apr 2009 08:36 AM |
|
Posted By HolmesEcoDesign on 12/24/2008 1:43 AM
i am trying to figure out
ooooooooooooooooooooo |
|
|
|
|
cajundriller
New Member
Posts:13
|
| 14 Apr 2009 08:53 AM |
|
|
|
| William Wainwright |
|
|
Brawler
Basic Member
Posts:154
|
| 22 Jun 2009 11:37 AM |
|
Posted By Father of the Paw on 02/27/2008 11:58 PM
Am planning a sip room addition and roof addition onto a strucure after a fire. Surviving section is standard 8' stud walls encased in a classic limestone block exterior, roughly 40' lng(would not be practical to replace with sips) adjoining sip wall section replaces 25'' section destroyed in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|
Brawler
Basic Member
Posts:154
|
| 22 Jun 2009 11:39 AM |
|
in fire. Had originally planned on using 30' attic trusses resting on top double plates over top of both sections. With trusses bottom chord serves as both 1st floor cieling and attic floor. To rebuild with sips would it be necessary to go with a taller panel (8' 8" or so) and use blocking to bump up the plate height of existing walls to accomidate joist hangers or is it possible to attach a hanger in the area where the roof panel meets the 8' stud/8' sip wall section? Might an engineerd truss/sip hybrid be feasable utilizing non structural panels? I just recently happened onto sips and am pretty much sold on the benefits, but part of me still loves the idea of multi tasking engineered truss. Any comments?
|
|
|
|
|