Directory

Products

Welcome to GreenBuildingTalk - the place to share, ask and learn about green building products and methods. While you can browse the site as a guest, you need to register in order to post. Registration is fast, simple and free so join our community today.

Forums

Members

You are not authorized to post a reply.

Author

Messages

slfriedm

Registered Users

Posts:9

05/26/2008 4:38 PM
Is there any general rule for the cost of the inside HVAC work compared to the outside drilling work? For example, it is approximately a 50-50 split or 20-70 split? Thanks

geodean

Registered Users

Posts:529

05/26/2008 4:52 PM
not that I know of

Dewayne Dean PalaceGeothermal.com Why settle for 90% when you can have 400% We heat and cool with dirt!

slfriedm

Registered Users

Posts:9

05/26/2008 5:54 PM
Thanks, I looked at your web site too. For example, from your web site take the retrofit of the medical clinic where the heating and cooling costs were reduced from $8,960 to $1,280. What was the cost of installation? Did the drilling make up most of the cost? What was the payback? Thanks again,

geodean

Registered Users

Posts:529

05/26/2008 8:27 PM
We didn't do the install on the medical clinic. We just used the case study. If I were to make a very rough estimate it would be drilling is 30 % to 50% of the total cost of the job. But keep in mind that costs can vary greatly from job to job.

Dewayne Dean PalaceGeothermal.com Why settle for 90% when you can have 400% We heat and cool with dirt!

You are not authorized to post a reply.

Professionals Serving
Your Location:

Creative Panels (Kingsburg, CA)

Amvic-Pacific (Nevada City, CA)

Sierra SIPs (San Andreas, CA)

GBT Project Albums:

myFirstRenovation (Staten Island, NY)

Oak Skies (Charlottesville, VA)

Log Home (Lakeland, TN)

My Home (York, ME)

More Info | Search