Greenblock Banner
 
 Register  Login   
Welcome to GreenBuildingTalk - the place to share, ask and learn about green building products and methods. While you can browse the site as a guest, you need to register in order to post. Registration is fast, simple and free so join our community today.
Find a Green Building Pro 
Browse Project Albums 
View Product Guide 
Unanswered Active Topics
Forums Search Members
Forums > Green Building Forums > General Forum - Residential > Subject: what's next best thing after SIP's and ICFs?

You are not authorized to post a reply.   
Prev Next
Author Messages
mf082008User is Offline
Registered Users

Posts:2




08/21/2008 10:44 AM  
I'm new to the forum. Thanks to all here for my rapid learning curve, but I still have far to go.

I'm planning an addition in a hillside with a walk-out basement door, but 75% of the walls will be below grade. My house is in the mid-atlantic climate. From what I've seen here so far, ICF's and SIP's are the way to go, But I'm concernened that my site has too many trees, wires, and changes in grade to get a boom truck in. What is the next best thing?

The conventional method here is CMU with furred out interior finishes with insulation on the inside. Is it bad to take this approach? 

Thanks for any advice-
Mike 
PanelCraftersUser is Offline
Registered Users

Posts:1329





08/21/2008 12:11 PM  
Posted By mf082008 on 08/21/2008 10:44 AM
I'm new to the forum. Thanks to all here for my rapid learning curve, but I still have far to go.

I'm planning an addition in a hillside with a walk-out basement door, but 75% of the walls will be below grade. My house is in the mid-atlantic climate. From what I've seen here so far, ICF's and SIP's are the way to go, But I'm concernened that my site has too many trees, wires, and changes in grade to get a boom truck in.

Well then, how are you going to get all of the CMU's to the site? If they can be delivered, either SIPS or ICF's should not be a problem.

....jc
If you're not building with OSB SIPS(or ICF's), why are you building?
wesUser is Offline
Registered Users

Posts:376




08/21/2008 3:15 PM  
JC is right, if you can get a load of CMUs into the site, ICFs would be easy. And concrete for the floor slab and the ICF walls come in the same trucks. A small tow behind pumper is more than adequate for basement walls, and takes up less space than the concrete trucks. Don't get talked out of doing it right.


Wes Shelby
Design Systems Group
Murray KY
wandr@ainweb.net
You are not authorized to post a reply.
Forums > Green Building Forums > General Forum - Residential > what's next best thing after SIP's and ICFs?



ActiveForums 3.6

Professionals Serving
Your Location:

Creative Panels (Kingsburg, CA)
Amvic-Pacific (Nevada City, CA)
Sierra SIPs (San Andreas, CA)
Blue Lupin Developments (Incline Village, NV)
Greenblock Worldwide Corp (Cave Creek, AZ)
View More

GBT Project Albums:

Mountain Ranch (Ellijay, GA)
heating system (New Cumberland, PA)
Riggs Remodel (Portland, OR)
magnolia remodel (seattle, WA)
Cottage (Rio Nido, CA)
More Info |  Search
Copyright 2008 by BuildCentral, Inc.   Terms Of Use  Privacy Statement