Enercept Banner
 
 Register  Login   
Welcome to GreenBuildingTalk - the place to share, ask and learn about green building products and methods. While you can browse the site as a guest, you need to register in order to post. Registration is fast, simple and free so join our community today.
Find a Green Building Pro 
Browse Project Albums 
View Product Guide 
Unanswered Active Topics
Forums Search Members
Forums > Green Building Technologies > Solar and Wind Power > Subject: Thermal mass in solar heated homes

You are not authorized to post a reply.   
Prev Next
Author Messages
Richard SmithUser is Offline
Registered Users

Posts:4




06/12/2007 10:00 PM  
I've found little on the thermal mass (storage) side of solar optimized home construction.  We have little interior storage width for masonary or water. 

Does anyone have suggestions for panel products that would require less than two in. thick that could produce a significant storage effect and still be reasonable for a couple to install.  I'm currently considering three layers of cement or green board.

What about Dupont's "energain" panels?  I find lots of literature but no prices or distributor sources.
SIPuserUser is Offline
Registered Users

Posts:3




06/14/2007 5:18 PM  
We have concrete in the floor that acts as thermal mass, trapping the daylight sun to heat the house at night; the thickness is 4 inches. I would also suggest a masonry fireplace, as it adds thermal mass. -- Juan

Richard SmithUser is Offline
Registered Users

Posts:4




06/15/2007 2:56 PM  
Thanks Juan.

We have substantial thermal mass in our floors exposed to winter sunlight., but have no space for a fireplace. I'm hoping to increase and distribute additional mass in wall boards or cement based stucco. However, I've yet to find heat retention specs for low cost drywall products. Any thoughts on that?
billmhUser is Offline
Registered Users

Posts:37




08/16/2007 6:04 PM  
I have ben looking into this area for a few months as I flesh out our adobe home to be built in NM. As others stated you get mass from your concrete or block floor. You can add Trombe (sp) walls on the south side interiors to absorb heat.  But again, you get heat storage from mass. The more mass, to an extent, the more heat storage. So for instance, you had a sun room on the southside of your house, the wall between it and the house could be brick to provide the mass storage. Like wise, you could put a brick wall some distance in from the windows so that the sunlight hits it. This is the trombe wall concept. But if you do not provide the mass you will be wasting time and money..

Bill
You are not authorized to post a reply.
Forums > Green Building Technologies > Solar and Wind Power > Thermal mass in solar heated homes



ActiveForums 3.6

Professionals Serving
Your Location:

Creative Panels (Kingsburg, CA)
Amvic-Pacific (Nevada City, CA)
Sierra SIPs (San Andreas, CA)
Blue Lupin Developments (Incline Village, NV)
Greenblock Worldwide Corp (Cave Creek, AZ)
View More

GBT Project Albums:

Mountain Ranch (Ellijay, GA)
heating system (New Cumberland, PA)
Riggs Remodel (Portland, OR)
magnolia remodel (seattle, WA)
Cottage (Rio Nido, CA)
More Info |  Search
Copyright 2008 by BuildCentral, Inc.   Terms Of Use  Privacy Statement