Highest slump you guys poured? > GreenBuildingTalk - Green Building Forums on Insulating Concrete Forms (ICF), Structural Insulated Panels (SIP), Radiant Heating, Geothermal Heat Pumps, Solar Power

Forums

Members

You are not authorized to post a reply.

Page 4 of 4

Author

Messages

adi43d

Registered Users

Posts:7

05/27/2008 1:36 PM
someone metioned Isorast earlier. check out these projects. SCC combined with DIY. most people around here would say - perfect recepe for disaster. they (germans) do not think so. my question is: is isorast system so much better that Amvic or Integraspec or any other good system or our contractors fear the unknown? http://www.das-passivhaus.de/gb-idx_wir.html Adi

ReadyToRetire User is Offline

Registered Users

Posts:195

05/27/2008 4:49 PM
I have a concrete processing question: At the site Adi provided, the first home had the walls filled by concrete mixed on demand from a silo located on site. But, when they did the ceilings, they trucked in the concrete and pumped it up. Why? What is the advantage of the silo system? Given that they had a silo on site, why then truck in concrete? Thanks in advance for any insights that you can offer. Very respectfully, Larry

Manfred

Registered Users

Posts:58

05/27/2008 11:18 PM
The walls are being filled with an SCC concrete through a line pump directly from the silo. The line pump is about 2" or even slightly less. The SCC is quite fluid and is being pumped in a slow manner. The ceiling deck is poured with regular concrete (B25 - 5000psi). As you can see in the pictures the delivery of the concrete is a lot faster. So, the line pump would be slow and there is only SCC product in the silo. Manfred Knobel

ReadyToRetire User is Offline

Registered Users

Posts:195

05/28/2008 1:49 PM
Thanks Manfred, that makes sense. Very respectfully, Larry

You are not authorized to post a reply.

Page 4 of 4

Professionals Serving
Your Location: