Hi
I would be most grateful for the following advice.
Has anybody any info on the following! I am looking for a tried and tested adhesive to manufacture (S.I.Ps) as I belife this will need to be a structural adhesive to bond EPS core to OSB skins. I have a glue roller machine that glues both top and bottom of the EPS which has rubber rollers.
The adhesive needs to have a working time of 30 mins and a press time of about the same.
The panel size is 1.2 x 3m x 100mm.
I would appreciate any help in this matter.
Regards
Tonya