Below are photos from a 4' stem wall we poured last month. This is a Logix ICF job that used our Monopour system. With two guys, the build was set-up & braced, and ready for concrete in a day and a half.

Click the link,  http://www.fab-form.com/fastfootMp/...jectRb.php for a video testimonial from the homeowner, Robert Biersteker.

If you have any questions or concerns I would love to hear them.

It's not clear to me that the outside or ground cold doesn't travel via the concrete to the center of the ICF, negating a good bit of the ICF insulation. But maybe the ICFs are just forms here.