Forums
News/Blogs
Project Album
Directory
Products
Services/Advertising
Register
Login
Site Sponsors
For Advertising Info,
Call 866-316-5300 or 312-223-1600
Welcome to
GreenBuildingTalk
- the place to share, ask and learn about green building products and methods. While you can browse the site as a guest, you need to register in order to post.
Registration is fast, simple and free so join our community today.
Find a Green Building Pro
Browse Project Albums
View Product Guide
Unanswered
Active Topics
Forums
Search
Members
Forums
>
Green Building Technologies
>
Insulating Concrete Forms (ICFs)
> Subject: Outside freah air?
You are not authorized to post a reply.
Prev
Next
Author
Messages
Oldest First
Newest First
jbsgroup
Registered Users
Posts:43
02/27/2002 10:53 PM
A Customers Question: W/ the Arxx Foam wall system & double insulated windows & doors, A customer asked for the need of outside freash air to be brought into a some what air tight building. We said this could be done by running a 4" flexiable suction line from the a/c unit to the soffit w/a door on it to shut of the outside air if need be.
Any comments!
Unregistered
Registered Users
Posts:2321
02/28/2002 12:37 AM
In my opinion (not even close to an HVAC person!!) it takes more than this. It will require a system that circulates and conditions the air - specifically designed to handle air from high moisture regions of the house. With the potential for condensation/mold/mildew problems in tight homes, I'd be a bit gunshy of an untested idea. You might check out the article at Journal of Light Construction site (link below). It deals with HRV units. There are also several good sites on teh web that deal with both HRVs and ERVs.
http://www.jlconline.com/cgi-bin/jlconline.storefront/3c7dc1ad00eda6fa271b401e1d2906a8/Product/View/0201inst
markross
Registered Users
Posts:1035
02/28/2002 9:21 PM
Assuming that the building envelope of the roof system is upgraded with vapour barriers, more insulation and such, you are now living in a very tight home, with very little airchange. Most codes in the north require furnaces to have a make up air source which is a 7" hole in the wall. Not enough.
You need an air exchange system of some source, I doubt a 4" flexible duct will do it if all it does is try to pull in from the outside. Where is the air going to go once the building has been pressurized? HRV and ERV technology helps as well. I reccomend a visit to www.lifebreath.com for more info on air change. or our own site www.arit.com for info on indoor air quality.
Mark Ross
"Le Canuck"
jbsgroup
Registered Users
Posts:43
03/02/2002 9:59 PM
Thanks, for all of your help
jbsgroup
You are not authorized to post a reply.
Green Building Forums
--General Forum - Residential
--General Forum - Commercial
Green Building Technologies
--Insulating Concrete Forms (ICFs)
--Structural Insulated Panels (SIPs)
--Radiant Heating
--Geothermal Heat Pumps
--Solar and Wind Power
--Windows/Doors and Interior/Exterior Finish
--Appliances, Lighting and Kitchen/Bath Fixtures
Green Living
--<a href="http://discuss.greenoptions.com">Green Options</a>
Feedback/Support
--Rules, Instructions and Announcements
--Suggestions/Feedback
--Testing Area
Forums
>
Green Building Technologies
>
Insulating Concrete Forms (ICFs)
> Outside freah air?
ActiveForums 3.6
Professionals Serving
Your Location:
Creative Panels
(Kingsburg, CA)
Amvic-Pacific
(Nevada City, CA)
Sierra SIPs
(San Andreas, CA)
Blue Lupin Developments
(Incline Village, NV)
Greenblock Worldwide Corp
(Cave Creek, AZ)
View More
GBT Project Albums:
magnolia remodel
(seattle, WA)
Cottage
(Rio Nido, CA)
Our new house
(Burt, MI)
The RANCH
(Williston, SC)
off grid SIP modern house kit
(Charlotte County, VA)
More Info
|
Search
Copyright 2008 by BuildCentral, Inc.
Terms Of Use
Privacy Statement