Welcome to GreenBuildingTalk - the place to share, ask and learn about green building products and methods. While you can browse the site as a guest, you need to register in order to post. Registration is fast, simple and free so join our community today.

Unanswered Active Topics Forums Search Members

You are not authorized to post a reply.	Prev Next
Author Messages Oldest First Newest First fly840 Registered Users Posts:16 01/07/2008 9:24 AM   Can anyone suggest a product or material to use as a terminating bar, near ground level, for my XT650 Polyguard Membrane?  So far I have used a 1/2 inch bead of mastic at the seams, and I am planning on parging the  remaining exposed ICF from the seem to the termination of the ICF.  If I parge, can that be the "terminating bar"???  I have about 50 feet by 6 inches of horizontal ICF showing and then a partially exposed wall (24 feet) with the ground sloping rougly 45 degrees down the wall.  Bottom line, do I need an additional product in addition to the mastic and parging? I appreciate any help you can give me. Bill
You are not authorized to post a reply.	Green Building Forums --General Forum - Residential --General Forum - Commercial Green Building Technologies --Insulating Concrete Forms (ICFs) --Structural Insulated Panels (SIPs) --Radiant Heating --Geothermal Heat Pumps --Solar and Wind Power --Windows/Doors and Interior/Exterior Finish --Appliances, Lighting and Kitchen/Bath Fixtures Green Living --<a href="http://discuss.greenoptions.com">Green Options</a> Feedback/Support --Rules, Instructions and Announcements --Suggestions/Feedback --Testing Area
Forums > Green Building Technologies > Insulating Concrete Forms (ICFs) > Terminating bar with Polyguard waterproofing membrane

ActiveForums 3.6