f7pilot
New Member
Posts:22
 |
| 21 Jun 2007 11:03 AM |
|
Has anyone used sips from a place called Sip Supply? Im looking at building with Polyurethane Sips but this cam lock system scares me. What if the panels dont are not square. Any help would be appreciated. |
|
|
|
|
|
|
edb
New Member
Posts:13
|
| 21 Jun 2007 12:13 PM |
|
Contact Winterpanel. Winterpanel uses splines. |
|
|
|
|
cmkavala
Veteran Member
Posts:4327
|
| 21 Jun 2007 02:40 PM |
|
SipSupply started out in Orlando is a re-seller of many products ....
not to be confused with Sip Supply, Inc. which is base in Tarpon Springs, Florida and sells EPS steel panels exclusively |
|
| Chris Kavala<br>[email protected]<br>1-877-321-SIPS<br /> |
|
|
eastsound
New Member
Posts:14
|
| 24 Jun 2007 11:21 PM |
|
f7pilot:
There is a much longer history to Sip Supply than has been related here. I will send you my contact info so that we may discuss the company and its product privately.
|
|
|
|
|
eastsound
New Member
Posts:14
|
| 24 Jun 2007 11:49 PM |
|
f7pilot:
Having trouble getting a private message to you. Reply to this message with your contact info and I will call you.
eastsound
|
|
|
|
|
f7pilot
New Member
Posts:22
|
| 25 Jun 2007 08:05 AM |
|
Hello eastsound, I have been out of town and just received your message. I will contact you today.
Thanks, for the reply. |
|
|
|
|
slenzen
Basic Member
Posts:434
|
| 30 Jun 2007 02:00 AM |
|
Why isn't every manufacturer using urethane? From what I've gathered it is superior adhesion, insulation value, strength, fire rating etc... over eps. |
|
|
|
|
cmkavala
Veteran Member
Posts:4327
|
| 30 Jun 2007 11:16 AM |
|
At one time; urethane was prone to off-gassing, shrinkage with age, seamed to attract insects,I do not know if the mfgs. have corrected this?
if you ever worked with it, the dust is itchy when it comes in contact with the skin.
my supplier manufactures both - but strongly reccomends the EPS over the urethane do to adhesion issues
I think the urethane is great in refrigeration applications where structural qualities are not as important |
|
| Chris Kavala<br>[email protected]<br>1-877-321-SIPS<br /> |
|
|
mmacgowa
Basic Member
Posts:166
|
| 30 Jun 2007 05:49 PM |
|
How come there is Coke and Pepesi? |
|
|
|
|
webgc
New Member
Posts:2
|
| 01 Jul 2007 12:14 PM |
|
east
i have been attempting to deal w/ sipsupply in easton ga. this the same co you're talking about?
if so, please contact me, as i would like to know what you know.
thanks, tim
[email protected] |
|
|
|
|
energy_efficient
New Member
Posts:29
|
|
f7pilot
New Member
Posts:22
|
| 18 Jul 2007 07:03 AM |
|
Does anyone know of or use a good urethane sip manufacturer? I know I might be putting you on the spot, but there seems to be alot of ghosts in their closets. Just want a solid manufacturer to work with. |
|
|
|
|
LMK
New Member
Posts:2
|
| 18 Jul 2007 03:50 PM |
|
Does Sip Supply sell Murus panels? |
|
|
|
|
eastsound
New Member
Posts:14
|
| 20 Jul 2007 12:40 AM |
|
LMK:
Sip Supply does not represent or sell Murus panels.
|
|
|
|
|
slenzen
Basic Member
Posts:434
|
| 20 Jul 2007 11:12 AM |
|
Jay, do you have reps/installers that handle your urethane sips in minnesota? what is general cost comparisons between urethane sips and eps sips or icf? |
|
|
|
|
JBS
New Member
Posts:13
|
| 20 Jul 2007 05:11 PM |
|
slenzen,
The general cost comparison between a complete delivered package for Murus EPS and PUR can be anywhere between $0 and $1/sf. We do not have official reps or installers in MN, but we have done several projects there and we could recommend a builder to you.
Jay |
|
|
|
|