I am looking for some rebar chairs to hold 2 bars in parallel about 2 inches apart and about 1 1/2 inches off the base. I need to put rebar in an Amvic roof system. I saw some in a display at the International Builders Show, but nobody in the booth knew where they came from. Thanks.

Opus: All the Insul-deck jobs we did where 3/4 off the deck, and ID supplied the chairs. I would check with Amvic if you haven't already. V-buck makes chairs for this purpose also but I have never priced them. I have quite a bit of 3/4 or 1" left over if your interested.

Dave

Wind-lock have them. I beleive they sell by case and they have couple difrent size.

Frank