Matt-W
New Member
Posts:3
 |
| 19 Apr 2008 11:18 AM |
|
Hello everyone i am new to this forum and i am currently getting my research done because i wanna build an ICF home w/ around 1600sq ft plus basement same size, also my father is building one around 5200sq ft right down the road and i cannot find any contractors that do ICF to give me a quote for it so we have decided to possibly do it ourselves however i cannot find any kinda pricing. so does anyone know a good estimate like per sq ft or any kinda estimate? also we are located in northern KY on the border of both OH and IN any help or insight will be greatly appreciated.
Matt |
|
|
|
|
|
|
bobgieser
New Member
Posts:33
|
| 19 Apr 2008 02:06 PM |
|
Matt:
Call Brad Munro in Florence for assistance with Nudura ICFs. He is the regional rep for that area. He will be glad to help.
859-630-0789
Bob Gieser
[email protected]
Nudura Rep
South Central KY
|
|
| Bob Gieser<br>Sales and Technical Support<br>Holdfast Technologies<br>Master Distributor for Nudura ICFs<br>(916) 214-4398-cell |
|
|
THE LOGICAL CHOICE
New Member
Posts:1
|
| 19 Apr 2008 02:43 PM |
|
matt
I am an icf installer in middle tn I would be glad to give you a quote for your project.My phone number is 931-260-9472 |
|
| THE LOGICAL CHOICE llc<br>We build insulated concrete homes<br>931-260-9472 [email protected] |
|
|
Brad Munro
New Member
Posts:1
|
| 19 Apr 2008 05:10 PM |
|
Matt,
I'm Brad a Rep. for Nudura ICF in Nky area. We are having a Training Class May 9 08 at 8:00 am
Holiday Inn Riverfront 600 West Third St Covington Ky.
We do have builder in the area as well.
Call me with any questions.
859-630-0789
Brad Munro |
|
|
|
|
vhehn
New Member
Posts:91
|
| 20 Apr 2008 09:40 AM |
|
http://www.icfdirect.com/fold-form-estimator.php
Using the form below, enter your information, click the send button and we will contact you with an estimatefor your project.
FOLD-FORM® Estimator |
|
|
|
|
Matt-W
New Member
Posts:3
|
| 21 Apr 2008 11:54 AM |
|
I appreciate the help guys and i will try and get off work for may 9th Brad is there an RSVP or that for the class? also mainly what i was looking for is what figures you used to provide an estimate mainly. however i will visit the link and i will post a building dimension pic if that would help??? |
|
|
|
|
ICFconstruction
Veteran Member
Posts:1324
|
| 22 Apr 2008 12:46 PM |
|
Take the training. Don't try it yourself. Do the finish work yourself, hire out the structure. |
|
| Brad Kvanbek - ICFconstruction.net |
|
|
Joe Westfall
New Member
Posts:9
|
| 23 Apr 2008 09:56 AM |
|
matt:
you don't want to rsik going it alone; nor does your dad. We are an experienced manufacturer of a rigid insulation wall and roof panel system and have over 100 yrs. of collective staff experience in the building trades and manufacturing industies.
Do you have an architect involved with prints designed? If so we possibly can help you both; contact us to discuss. 216-851-4641. |
|
|
|
|
bobgieser
New Member
Posts:33
|
| 29 Apr 2008 11:15 AM |
|
Matt:
Estimate by taking the length of the perimeter walls and multiply that by the height of the walls, including the floor system if you are going all the way up. Now you have the square foot of wall space. Back out the s/f of window and door openings. cut that amount by 1/2 to 1/3. Subtract that from the total s/f wall space and you have the s/f of forms needed to do the job with a little buffer for waste. Not too much now or we will have to change our motto, that we don't waste materials. Depending on where you are building and how much concrete is going for and how much rebar is this hour!!, you can estimate the job pretty close. |
|
| Bob Gieser<br>Sales and Technical Support<br>Holdfast Technologies<br>Master Distributor for Nudura ICFs<br>(916) 214-4398-cell |
|
|
icfblocks
Basic Member
Posts:202
|
| 29 Apr 2008 08:47 PM |
|
Call Dan Hudnall in Kentucky IntegraSpec distributor. Class D trainer One of the best. 270-532-0287 |
|
| Thanks,<br>Tom<br>www.advbuildingtech.com |
|
|
irnivek
Basic Member
Posts:229
|
| 30 Apr 2008 09:40 AM |
|
Some local distributors we have dealt directly with and would recommend:
Dixie Distributors Glen and Tim Hamilton -Louisville KY Amvic Full Serivice
Rock Solid Concrete Homes- John Finn- Logix- Bedford, In Full Service
Betz Bros Lumber Co. - Reward- Celestine In. Mostly Sales only
Chad Johnson- Superform-Hardinsburg, In. Full service
Holdfast Technologies- Nudura- Throughout Ohio, Indiana, and Kentucky- Full service
|
|
|
|
|
bobgieser
New Member
Posts:33
|
| 30 Apr 2008 05:57 PM |
|
Matt:
You are certainly "NOT STUCK IN THE MIDDLE ANYMORE."
lOOK AT THE RESPONSES |
|
| Bob Gieser<br>Sales and Technical Support<br>Holdfast Technologies<br>Master Distributor for Nudura ICFs<br>(916) 214-4398-cell |
|
|
woulfcc
Basic Member
Posts:147
|
| 01 May 2008 08:20 AM |
|
Dan Hudnall I one of the best guys you would like to meet and work with. If I was you I would ask him for help with this and I am sure you could work out something.
It's not just stack and pour with icf's and you only get one chance to get it right.
The block you use is up to you , the wall being pin on and straight is best left to a pro (I have seen a lot of walls that have been built (DIY) that would not pass code)
They call in a pro after the concrete is hard and what can you do?
You don't want to be that guy. All the money (And time) that you think you would save buy doing it your self you can lose on rework.
I hope this will get you unstuck and out of the middle. |
|
| Changing How the World BUILDS!<br>Green , Done , Easy<br>Woulf c.c. of Wisconsin |
|
|
Matt-W
New Member
Posts:3
|
| 03 May 2008 05:13 PM |
|
you all have completely helped me, i am going to the class on may 9th i believe and i will contact these local distributors i never knew any of them existed and i was researching for awhile |
|
|
|
|
bobgieser
New Member
Posts:33
|
| 18 May 2008 12:39 PM |
|
Matt:
Had a great class. Some residential, some commercial builders and some owner builders. Sorry we missed you.
Bob |
|
| Bob Gieser<br>Sales and Technical Support<br>Holdfast Technologies<br>Master Distributor for Nudura ICFs<br>(916) 214-4398-cell |
|
|