the wife and i are planning on building a icf single story (8 corner) with a full walk out basement about 2000 sq ft in 2010 near port orchard washington on our sloped property(hardpan and sandy loam)

the funds for this project have already been secured so there is no bank or mortgage issues to contend with

we have a rough drawing of what we want on graph paper subject to a few changes but need the drawing converted to a code acceptable/proper set of blueprints that will be approved by kitsap county

we also may need a icf sub with good references to do the footings/walls/basement slab if the price is reflective of this current economy as i am getting fatter and lazier with age and this seems like a good time to get decent work for a non bubble price

if you are interested please e-mail me at (edit : i just read the tou and see e-mails are not proper) and lets see where it goes

thank you in advance

keith

Try local distributors and the ICFA. I also think APEX is based near you.

Here are some starts.  Let me know how you do. 



http://www.wilson3.com/usepolysteel%20nov%202004%20radio/residential%20polysteel%20page.htm

http://icf-dev.com/

http://www.washingtonconcrete.org/

Kotero,

We work in the Seattle area. Call Karen or Eric at Legacy ICF. (360) 848-9492 WWW.Legacyicf.com

ICF Contractor