I was curious if anyone has any resources, references or knowledge about what a typical cost per square foot would be to rent shoring for ICF roof forms such as litedeck or quaddeck, in the southeast region. Whether it is a cost that an installer integrates into an estimate because he owns the shoring or a cost paid to actually rent from a third party. The building is about 2500sqft and we would probably be looking at a slightly denser shoring configuration due to the load in this case. Thank you.

I would think that the people that sell Build Deck, Litedeck etc. could be a great source for the answer.

8576 email me at peteratinsuldeckdotcom....

Don't play with suspended slabs, engineer should be reviewing the project and designing the temporary bracing, people die when not done properly, 2500' is not a small slab and many aspects need to be reviewed

Thank you everyone for your responses.

Our engineer will be specifying the shoring but I was looking to get an idea of the cost in advance as I try to estimate.
Didn't think to ask the vendors but I will go ahead and try.