Posted By cmkavala on 27 Jul 2010 05:08 PM

Posted By jonr on 27 Jul 2010 04:06 PM
I recall that some mini-splits had built-in dehumidification capability. Not sure how it worked.

the mini-split in my office keeps humidity between 30-40%

Do the controls allow you to adjust a humidity setpoint as well as temperature?  (Some do- and internally dial the blower speed back until the RH setpoint is satisfied.)

Another good thing about some mini-splits is that they use inverters - they can control the compressor output and run more continuously in light load conditions. This is better for dehumidification.